IBM 4247 User Manual

Attachment Card Microcode Module Location and Orientation - Models 001
and 002
On the Level 2 (short) attachment card, use the orientation marks to help you position the microcode module in
the module socket (see Figure 6 on page 54).
Attention: Incorrect orientation of the module will damage the module and can damage the attachment card!
Card to
Logic Board
Cable
Microcode
Module S1
Twinax Connector
Coax Connector
Corner
CutOff
Bevel
248 mm
9.7 in.
e90aloc4
Figure 40. Rear View of Attachment Card Microcode Module Location and Orientation - Models 001 and 002
(Level 1 - Long)
Corner
Cut Off
Bevel
S1
e90act10
182 mm
7.2 in.
Figure 41. Rear View of Attachment Card Microcode Module Location and Orientation - Models 001 and 002
(Level 2 - Short)
Chapter 4. Locations 269

IBM 4247 Specifications

General

Brand	IBM
Model	4247
Category	Printer
Language	English