Table 63.
Bidirectional Adjustment
0*
-6 to 6
RESTORE MFG DEFAULTS:
Table 64.
Restore Mfg Defaults
No *
Yes
* Manufacturing Default
** When Emulation is set to Native 4247, 4202 III XL, or 2381.
*** When Emulation is set to Epson FX.
Program Configuration Menu
How To Print the Program Setup Configuration:
1. Power on (|) the printer.
2. Load forms.
3. Press the Menu/Enter key.
4. The printer goes off-line, and the message PRINT OUT=NO displays.
5. To print the settings, press the Pitch key. The message PRINT OUT=YES displays and the Program Setup
Printout is printed.
Program Configuration Printout - Sample Printout Showing Factory Defaults:
Figure 195 on page 493
shows the factory default settings for the Program Configuration for a Model A00 printer.
Appendix A. Printer Configuration 492
To Next Page
Loading...
Need help?
General