3. Press Scroll ↑ or Scroll Down↓ until you find the Category you want.
4. Press Enter to select that Category.
5. Press Scroll ↑ or Scroll Down↓ until you find the Parameter you want.
6. Press Enter to select that Parameter.
7. Press Scroll ↑ or Scroll Down↓ until you find the Value you want.
8. Press Enter to select a new Value. An asterisk (*) appears to indicate the new current Value.
9. To return to the CONFIGURATION MENU, press Return to return to the Parameter level, and then press
Return again.
10. To save changes to a Custom Set, return to the CONFIGURATION MENU. Select Configuration Storage.
Select Save Current Values. Select a Custom Set.
11. To return the printer to
ready
from any level, press Start.
Appendix A. Printer Configuration 505
To Next Page
Loading...
