IBM 4247

Table 108. Forms and Paper Specifications
Paper Criteria Characteristics Forms Paths
Continuous Forms Cut Sheet
Front Push, Rear Pull,
Push Pull
Rear Push Manual Feed
Dimensions Width 76.2 to 431.8 mm
3to17in.
76.2 to 431.8 mm
3to17in.
114.3 to 444.5 mm
4.5 to 17.5 in.
(Note 8)
Length 76.2 to 609.6 mm
3to24in.
76.2 to 609.6 mm
3to24in.
101.6 to 609.6 mm
4to24in.
(Note 8)
Single Part Weight 55 to 150 g/m
2
15 to 40 lb
55 to 80 g/m
2
15 to 21 lb
50 to 120 g/m
2
13.3 to 32 lb
Thickness (minimum) 0.08 mm
0.003 in.
0.08 mm
0.003 in.
0.08 mm
0.003 in.
Appendix B. Supplies, Forms, Paths, & Environmental Considerations
535