Table 7. MAP 0122: Network Print Server Attachment (continued)
Step Questions/Actions Yes No
2.
Tests with the Communication Line Connected
Work with each symptom in “Reference Table 7,
Network Server Problems – NPS and LAN Attachment
Card” on page 156 before going to the next item.
Is the problem corrected?
Run T&D in Automatic Mode to
verify correct printer operation.
For Model A00, see “How To
Run the Test and Diagnostic
(T&D) Programs” on page 161.
For Models 001, 002 or 003,
see “How To Run the Test and
Diagnostic (T&D) Programs” on
page 201.
Refer to the Administrator’s
Guide for your NPS unit:
S246-0111 for Ethernet
attachment
-or-
S246-0112 for Token Ring
Chapter 1. Diagnosing Problems
61
To Next Page
Loading...
Need help?
General