IEMCA Master 80 UP HyperFlexible - Cycle Performing Mode in the Step-by-Step Function

EN
6 - USE AND OPERATION Master 80 UP HyperFlexible
6 - Pag. 22 / 22
6.12 CYCLE PERFORMING MODE IN THE "STEP-BY-STEP" FUNCTION
FOREWORD
This mode may be used for many reasons, as for instance:
• to check a complete bar change cycle;
• to check the bar feeder mechanics;
• etc.
Procedure
• press
to start the bar feeder;
• make sure that the remnant drop device is closed, otherwise, press and to close
it;
• press
and to select the "semiautomatic function";
• press and the bar feeder performs the first step;
• press and the bar feeder performs the second step, and so on.