IEMCA Master 80 UP HyperFlexible - Packaging; Lifting

EN
4 - HANDLING AND INSTALLATION Master 80 UP HyperFlexible
4 - Pag. 2 / 2
4.1 PACKAGING
There are three possible bar feeder packaging:
A WITHOUT PACKAGING.
B WITH PALLET: the bar feeder is placed on a pallet and wrapped with protective film.
C WITH CRATE: the bar feeder is contained in a crate and wrapped with protective film.
4.2 LIFTING
DANGER - WARNING:
lifting and handling shall be carried out using suitable means and performed by
skilled personnel only.