IEMCA Master 80 UP HyperFlexible - Bar Feeder Without Packaging Lifting

4 - HANDLING AND INSTALLATION Master 80 UP HyperFlexible
EN
4 - Pag. 3 / 3
4.2.1 Bar feeder without packaging - Lifting
• Fit the two lifting brackets (A) (at a distance of
2,710 mm from each other with magazine L=33).
• Use a hook lifting device of adequate capacity.
ELECTRIC CABINET
• Install two round eyebolts (A) with threaded
stem (1 UNI - ISO3266 M10).
• Use a hook lifting device of adequate capacity.