1 - GENERAL INFORMATION Master 80 UP HyperFlexible
EN
1 - Pag. 3 / 3
1.2 PURPOSE OF THE MANUAL
This manual has been written and supplied by the manufacturer, the information herein
contained has been written in Italian (manufacturer's language) to be translated to other
languages, in order to comply with legal and/or commercial requirements. This manual is
integral part of the bar feeder equipment.
The compliance with the instructions herein ensures the operator and bar feeder safety as well
as economy of operation and longer life of the bar feeder itself.
The important parts of this manual have been highlighted in bold type and are preceded by the
following symbols:
DANGER - WARNING:
indicates impending danger which might cause serious injuries; exert the
maximum caution.
WARNING - CAUTION:
indicates that it is necessary to adopt suitable behaviours so as to avoid
accidents or damages to property.
INFORMATION:
these are technical instructions of particular importance.
For a quick search of the topics, see the table of contents.
This manual, which contains all the instructions for the bar feeder operation and maintenance,
is supplied with: the "Keyboard instruction manual".
The "Keyboard instruction manual" contains all the instructions on how to use the installed
software.
INFORMATION:
The data included in this publication are only given as an example.
IEMCA may apply changes to the model described in this publication at any time
for any technical or business reason. Contact IEMCA service department for
further information.
To Next Page
Loading...
