3 - SAFETY - GENERAL INFORMATION Master 80 UP HyperFlexible
EN
3 - Pag. 13 / 13
3.9 FORESEEABLE MISUSES
• Do not tamper with the machine's safety devices (for example, the safety microswitches of
the openable guard to access the bar magazine)
• Do not use the lubrication pump for other purposes (for example, to pour different liquids)
• Do not use the oil tank for other purposes and do not pour into it liquids or substances
different from those recommended by the manufacturer
• Do not load bars made of flammable materials
• Do not load bars with a greater straightness than the one recommended by the manufacturer
• Do not load bars with sizes or shapes different than those recommended by the
manufacturer
• Do not interfere with any body part on the bar feed axis
• Do not approach the bar feeder with open flames or very hot objects (for examples,
cigarettes). Danger of oil flammability.
• Do not draw electricity or pneumatic energy from the bar feeder to power other machines or
tools
• Keep hands out of the remnant recovery zone. Residual risks of upper limbs crushing! (Risk
due to remnant drop and clamp device).
• The magazine having no guards, it is forbidden to climb on it.
• Keep your limbs out of the bar feeding magazine zone when near the elevators. Residual
risks of elevator downward slipping leading to limb crushing!
To Next Page
Loading...
