3 - SAFETY - GENERAL INFORMATION Master 80 UP HyperFlexible
EN
3 - Pag. 5 / 5
3.5 BAR FEEDER MAINTENANCE - Safety
• Do not allow unauthorized personnel to carry out maintenance operations.
• Read this manual carefully before carrying out maintenance operations.
• Do not lubricate, repair or adjust the bar feeder while running, unless expressly indicated in
the manual.
• Stop the bar feeder in accordance with the foreseen procedures before carrying out
lubrication or other operations.
• Do not use matches, lighters or torches as lightning means during operations with
inflammable fluids.
• Keep drain oil in suitable containers and deliver it to companies specialized in the storage
and disposal of polluting waste products.
• Avoid environmental pollution.
• Use original IEMCA spare parts only.
• Considering that oil and polyurethane material is used, the disposal of the guide channels
will be performed according to the regulations in force in the installation country.
To Next Page
Loading...
