EN
3 - SAFETY - GENERAL INFORMATION Master 80 UP HyperFlexible
3 - Pag. 4 / 4
3.4 USE AND OPERATION - Safety
• The working area around the bar feeder must always be kept clean and uncluttered so as to
allow immediate access to the emergency devices and to perform the bar loading without
creating obstructions or danger.
• Perform the starting sequence of the operating cycle as recommended.
• Do not put hands or anything else near or inside the moving parts or parts in tension.
• Do not wear bracelets, watches, rings and ties.
• If necessary, use strong work gloves with five fingers, which do not reduce the grip
sensitivity or power.
• Wear work shoes as well as personal protection equipment as provided for by the safety
regulations in force in all countries.
• Inform the maintenance personnel of any operating anomalies.
• Before starting the bar feeder, make sure that there is no personnel engaged in servicing or
cleaning the machine.
To Next Page
Loading...
