IEMCA Master 80 UP HyperFlexible - EC Declaration of Conformity

EN
3 - SAFETY - GENERAL INFORMATION Master 80 UP HyperFlexible
3 - Pag. 6 / 6
EC CONFORMITY DECLARATION
(2006/42/ EC Regulation, EnclosureII, Part A)
Mr TOMASO TAROZZI, acting as MANAGING IEMCA with legal office and delegated by the
company I G M I S.p.A. DIVISIONE IEMCA with legal office and establishment in Via
Granarolo, 167 – 48018 FAENZA (RA) as manufacturer,
DECLARES
on his own responsibility that the machine:
AUTOMATIC BAR FEEDER
- is in compliance with the requirements of 2006/42/ EC regulation and with the national
implementing regulations,
- is in compliance with the following European regulations:
o 2006/95/ EC regulation (low tension);
o 2004/108/ EC regulation (electromagnetic compatibility).
Otherwise he declares that the person in charge for the technical issue editing is Mr. Giampaolo Morandi, General
director of the a.m. company.
TOMASO TAROZZI – Managing Director CEO
FAENZA, 28/08/2014
…………………………………………
(delegate signature)
3.6 EC DECLARATION OF CONFORMITY
MASTER
(type/model) (registration number)