EN
4 - HANDLING AND INSTALLATION Master 80 UP HyperFlexible
4 - Pag. 16 / 16
4.4.6 Bar feeder fastening
WARNING - CAUTION:
failure to perform or a wrong bar feeder
fastening to the ground may be the
major cause of a bad operation of the bar
feeder and of its consequent damage.
• Drill the floor and fix the backing plates with
expansion plugs. Use the higher number of
expansion plugs to ensure a correct fastening.
• Check the levelling and alignment once more.
• Remove all the equipment used for the levelling
and alignment phases and restore the initial bar
feeder conditions.
To Next Page
Loading...
