Creating a User Waypoint by Radial/Distance (continued)
Action Explanation
1. In DB mode, turn the Large knob to
display the Create User Waypoint By
Radial/Dist page.
CREATE USER WPT
BY RADIAL/DIST
PRESS ENT
DB
If the maximum of 500 User waypoints
already exist, the display below
appears, and you must delete a User
waypoint before you may create a new
waypoint.
CREATE USER WPT
BY RADIAL/DIST
PRESS ENT
DB
2. Pressing ENT displays the Reference
Waypoint Entry page. If the desired
reference waypoint identifier is
displayed, skip to step 8.
REF WPT: AAP
000.0° 000.0NM
DB
131
Operations DB Mode Procedures
DB
ENT
To Next Page
Loading...
