Searching Around a Waypoint
The following procedure is used to locate waypoints that are nearby a
selected waypoint. You should understand use of the Waypoint
Retriever before executing this procedure. The Waypoint Retriever
is described in Operations, Retrieving a Waypoint.
Flow Chart
In this flow chart, waypoints are retrieved by identifier. Waypoints
may also be retrieved by City/Facility name.
33
Operations Emergency Mode Procedures
ENTPRESS
ENTPRESS
PRESS EMG
THE CHOOSE WAYPOINT TO
TURN TO DISPLAY
SEARCH AROUND PAGE
IS THE DESIRED WAYPOINT TO
SEARCH AROUND DISPLAYED?
YES
YES
NO
DATABASE TYPE FLASH
TURN TO MAKE THE
TURN TO DISPLAY
DESIRED DATABASE TYPE
TURN TO DISPLAY
THE DESIRED CHARACTER
IS THE DESIRED WAYPOINT
IDENTIFIER DISPLAYED
PRESS SEL
PRESS SEL
TURN TO MAKE THE IDENTIFIER
CHARACTERS FLASH
TURN TO MAKE THE IDENTIFIER
CHARACTER TO CHANGE FLASH
NO
TURN TO DISPLAY
THE 20 NEAREST WAYPOINTS
IN THE CHOSEN DATABASE
TURN TO DISPLAY THE
DESIRED DATABASE TYPE
To Next Page
Loading...
