Choosing the Fuel Measure Units
The following procedure is used to choose the fuel measure units that
appear in fuel displays. Fuel may be measured in US Gallons (USG),
Imperial Gallons (IMG), Liters (L), Pounds (LBS), or Kilos (KGS).
1. In SYS mode, turn the Large knob to
display the System Info page.
SYSTEM INFO
PRESS ENT
SYS
2. Pressing ENT activates the Navigation
Info sub-state functions. Turn the
Large knob to display the Fuel
Measure page.
FUEL MEASURE
USG
US GALLONS
SYS
3.
Pressing SEL activates editing. Turn
the Small knob to choose the desired
fuel measure units.
FUEL MEASURE
LBS
POUNDS AVGAS
SYS
4. Press ENT to save the selection.
FUEL MEASURE
LBS
POUNDS AVGAS
SYS
205
Operations System Information Sub-State
ENT
To Next Page
Loading...
