II Morrow Inc. NMC 2001 - Choosing the Barometric Pressure Units

Choosing the Barometric Pressure Units
The following procedure is used to choose the barometric pressure
units that appear in the Local Altimeter Setting page in Nav mode.
Action Explanation
1. In SYS mode, turn the Large knob to
display the Navigation Info page.
SYSTEM INFO
PRESS ENT
SYS
2. Pressing ENT activates the Navigation
Info sub-state functions. Turn the
Large knob to display the Barometric
Pressure Units page.
BARO MEASURE
"
INCHES
SYS
3. Pressing SEL activates editing.
BARO MEASURE
"
INCHES
SYS
4. Turn the Small knob to display the
desired Direct-To Entry Option. Press
ENT to save the option.
BARO MEASURE
MB
MILLIBARS
SYS
206
System Information Sub-State Operations
SYS
ENT
SEL
ENT