II Morrow Inc. NMC 2001 - Manually Selecting a Flight Plan Leg

Manually Selecting a Flight plan Leg
Approach operations often result in the need to manually select a leg of
the active flight plan. Manual leg selection will often be required when
operating with Radar vectors and there is the need to intercept an
approach course. It may also occur when flying a DME-ARC to
intercept an approach course.
1.
Press FPL twice to reach your active
flight plan. Then turn the Small knob to
display the desired leg.
LGD TO BKE
2* 146° 28.2NM
ARPT IAF
2.
Press ENT.
LGD BKE
PRESS ENT
TO ACTIVATE LEG
3.
Press ENT to accept the displayed
destination waypoint. The unit will then
go to NAV mode.
ETE BKE 00:05
à 0.006
BRG 146 27.7NM ·
236
Approach Procedures Operations
ENT
FPL
FPL
ENT