II Morrow Inc. NMC 2001 - Editing the Direct-To Entry Option

Editing the Direct-To Entry Option
The following procedure is used to edit the Direct-To Entry Option.
Action Explanation
1. In SYS mode, turn the Large knob to
display the Navigation Info page.
Navigation Info
Press ENT
SYS
2. Pressing ENT activates the Navigation
Info sub-state functions. Turn the
Large knob to display the Direct-To
Entry Option page.
DIRECT-TO ENTRY
NEVER CLEARS
ACTIVE PLAN
SYS
3. Pressing SEL activates editing.
DIRECT-TO ENTRY
NEVER CLEARS
ACTIVE PLAN
SYS
4. Turn the Small knob to display the
desired Direct-To Entry Option. Press
ENT to save the option.
DIRECT-TO ENTRY
NEVER CLEARS
ACTIVE PLAN
SYS
198
Navigation Information Sub-State Operations
ENT
ENT
SEL