GPS time can also be obtained in UTC hours along with the date.
Finally, the user can perform a normal reset. A normal reset sends the
time, date and position to the GPS receiver. This will interrupt present
navigation and restart satellite acquisition. This is the same sequence
thatisperformedwhentheNMCispoweredON.This reset is provided
but is NOT required for normal use.
PRESS ENT TO DO
A NORMAL
GPS RESET
SYS
Miscellaneous Sensors Sub-State Displays
These displays pertain to systems that include miscellaneous sensors.
The miscellaneous sensors are the F/ADS (Fuel/Air Data Sensor), Fuel
Sensor, and/or encoding altimeter.
Air Data Sensor Information
If the system does not include a F/ADS, the next display is the only
page shown for the Air Data Sensor information.
AIR DATA INFO
NO DATA
AVAILABLE
SYS
If the Air Data Sensor information is available, the next screens are
available for information on the Air Data Sensor.
174
SYS Mode Displays Operations
To Next Page
Loading...
