Repeating an Approach
You must cross the FAF inbound with the FAF selected as the active
waypoint to allow reactivation of an approach. So, set up a course to
return to the IAF and then back to the FAF.
1.
Press FPL. Turn the small, inner knob to
display the IAF as the TO waypoint.
MMV TO UBG
2* 018 11.6nm
ARPT IAF
2.
Press DIRECT-TO and then ENT to
establishadirectcourse backto the IAF.
VOR UBG
NEWBERG
FACIL OR USA
or
3.
Press the DIRECT-TO button twice to
set a new Desired Track (DTK) to the
selected waypoint. This also activates
theOBS/HLDannunciator, so remember
to press the OBS/HLD annunciator to
enable waypoint sequencing when you
have established your inbound course.
Turn the Small knob to change the
flashing value. Turn the Large knob to
move the cursor. Press ENT when
finished. Press one of the mode buttons
(i.e. NAV, DB, FPL, or SYS) to quit
without changing anything.
OBS DTK: 159
TO VBG
BRG 159 DTK 159
272
Approach Operations Operations
FPL
D
D
ENT
D
ENT
To Next Page
Loading...
