Editing a User Waypoint
The following procedure is used to change the identifier,
latitude/longitude coordinates, or runway length of an existing User
waypoint.
Flow Chart
135
Operations DB Mode Procedures
PRESS DB
THE MODIFY USER WPT PAGE
TURN TO DISPLAY
ENTPRESS
ENTPRESS
DESIRED USER WAYPOINT
TURN TO DISPLAY THE
ENTPRESS
CHARACTER TO CHANGE FLASH
TURN TO MAKE THE
DESIRED CHARACTER
TURN TO DISPLAY THE
IS THE WAYPOINT INFORMATION CORRECT?
YES
NO
DOES THE WAYPOINT HAVE A DUPLICATE IDENTIFIER?
NO
THE WAYPOINT INFORMATION IS UPDATED
YES
To Next Page
Loading...
