Editing a User Waypoint (continued)
Action Explanation
1. In DB mode, turn the Large knob to
display the Modify User Waypoint
page.
MODIFY USER WPT
PRESS ENT
DB
If there are no User waypoints stored,
the display below appears.
MODIFY USER WPT
DATABASE EMPTY
DB
2. The NMC displays the Find Waypoint
to Modify page. Turn the Small knob
to display the desired waypoint. If
desired, you may press SEL to activate
character editing to display the
waypoint; however, this is generally
unnecessary unless there are a large
number of User waypoints.
FIND WPT TO MOD
HOME USER
PRESS ENT
DB
136
DB Mode Procedures Operations
DB
SEL
To Next Page
Loading...
