NMC Removal (Panel Mount)
The following procedure is used to remove the panel mounted NMC
from the aircraft panel. Reverse this procedure to re-install the NMC.
1. Unscrew the two mounting rods under the NMC front panel with the
flat blade screwdriver provided (P/N 555-0500). Insert the
screwdriver blade into the face plate holes, as shown in Figure 1, to
reach the mounting rod screw heads.
2. Pull the unit straight out of the mounting tube.
332
Flight Simulator Apollo NMC
Mountingscrew holes
APOLLO
NAVIGATION MANAGEMENT SYSTEM
2001
NAV
DB
FPL
SYS
M
S
G
G
E
M
ABQ
PDX
SLE
ARPT
VOR
ARPT
F
ROM
T
O
N
EXT
INFO
SEL
ENT
D
Figure 1 - Apollo NMS Panel Mount
To Next Page
Loading...
