RAIM Predict Ignore List Sub-Displays
The RAIM Predict Ignore List (RPIL) pages allow the user to specify
satellite outages as presented in NOTAMs (Notice to Airmen) or
NANUs (Notice Advisory to NAVSTAR Users). This list is only used
for RAIM prediction and is not used in navigation. To Access the RPIL
pages in NAV mode, rotate the Large knob to the RAIM predict page,
then rotate the Small knob to display the RPIL page for the satellite
(listed by PRN number) that you want to exclude from the RAIM
prediction. Press the SEL button and use the Large and Small knobs
to select and change fields.
NOTE
The NMC will automatically reinclude satellites whose
out-of-service time has elapsed.
PRN01
TO IGNORE SAT
PRESS SEL
Clear RAIM Predict Ignore List
The user has the option to clear the RPIL. In the NAV mode, use the
Large knob to display the main RAIM prediction page. Press SEL to
display “Select Waypoint?”. Use the Large knob to display “Predict
RAIM?” on the top line. Use the Small knob to display “Clr Ignore
List?”. Press ENT to clear the RPIL. This will make all satellites
available for future RAIM predictions.
CLR IGNORE LIST?
AT:SLE ARPT
23FEB99 17:33
77
Operations NAV Displays
To Next Page
Loading...
