Setting Runway Limits
The following procedure is used to choose the runway length, surface
and lighting you require. When using Emergency Search or Search
Around a Waypoint, the NMC will display only those waypoints that
meet or exceed the runway requirements you specify. If a runway
length of 0 feet is chosen, you cannot set runway surface or lighting
limits.
Flow Chart
36
Emergency Mode Procedures Operations
ENTPRESS
YES
THE RUNWAY LIMITS PAGE
TURN TO DISPLAY
PRESS TO ACTIVATE EDITINGSEL
INFORMATION TO CHANGE FLASH
TURN TO MAKE THE
TURN TO DISPLAY THE DESIRED INFORMATION
ARE THE DESIRED RUNWAY LIMITS DISPLAYED?
NO
PRESS EMG
To Next Page
Loading...
