Waypoint Information and Comments
These procedures are used to display information and personal comments
on waypoints. Waypoint information is stored on the data card, and can
not be changed. Comments you create are stored in the NMC, and may be
edited and deleted. A comment may be entered on any waypoint in any
database; however the maximum number of comments that may be stored
is 200. To add a new comment once 200 comments have been entered, a
previously entered comment must be deleted.
Displaying Waypoint Information
The following procedure is used to display waypoint information stored
on a data card. When in NAV mode, pressing INFO displays information
about the To waypoint. In FPL mode, pressing INFO displays
information about the To waypoint for the active leg. In EMRG mode or
DB mode, pressing INFO displays information about the displayed
waypoint. When the INFO function is active, you may scroll through the
available information displays on a waypoint by turning the Small knob.
The mode annunciator flashes when the INFO function is active. In all
cases, pressing INFO again exits the INFO function.
Action Explanation
1. Display the desired
waypoint.
In any mode, display the desired
waypoint. NAV mode is used in the
following example. Any Nav page may
be displayed. Pressing INFO in NAV
mode displays information on the To
waypoint.
FROM SNA ARPT
TO SBA ARPT
NEXT PXN VOR
NAV
2.
TurntheSmallknob toscrollthrough the
available information displays. Pressing
INFO again exits the information
function.
SBA AIRPORT
AVAILABLE FUEL:
AVGAS/JET
NAV
121
Operations DB Mode Procedures
INFO
INFO
NAV
To Next Page
Loading...
