Position Sensor Sub-State
The Position Sensor sub-state is used to display and modify position
sensor settings. If Loran sensor(s) are installed, this information
includes: TDs (Time Differences), OSC (Reference Oscillator)
frequency and temperature, GRI’s, and Triads.
If GPS sensor(s) are installed, this information includes: the number of
healthy satellites, the number of visible satellites, present altitude,
track, ground speed, identifiers of the satellites used, the UTC
(Coordinated Universal Time), satellite status, satellite elevation,
SNR (Signal to Noise Ratio), and Azimuth.
213
Operations
To Next Page
Loading...
