Display Units
Nav displays that show distance may be selected to show either
nautical miles, statute miles, or kilometers. Altitude displays may
show either meters (m) or feet (ft). These selections are made in the
Nav Info section of the System mode.
1. In the Navigation Info section of the
System function, turn the Large knob to
the Display Units Page.
Display Units
Distance: nm/kts
Altitude: ft
2.
Press SEL to activate selection. The
Distance value will flash. Turnthe Small
knob to change the value.
Display Units
Distance: nm/kts
Altitude: ft
3.
Turn the Large knob to move to the
Altitude selection. Turn the Small knob
to change the value.
Display Units
Distance: sm/mph
Altitude: ft
4. After completing your selections, press
ENT to save the values.
196
Navigation Information Sub-State Operations
To Next Page
Loading...
