5.
Turn the Large knob to make the GRI
name flash. Turn the Small knob to
display the desired GRI.
LORAN1 GRI 9970
NW P
ACIFIC
GRADE 00 MANUAL
SYS
6.
Pressing ENT enters the displayed GRI.
Pressing any mode button exits this
function without entering any changes.
LORAN1 GRI 9970
NW PACIFIC
GRADE 00 MANUAL
SYS
Manual Triad Selection
The following procedure is used to manually select the Loran triad.
Prior to using this procedure, you must manually select the GRI(s).
Only one triad may be manually selected for each Loran sensor.
1.
In SYS mode, turn the Large knob to
display the Position Sensor page.
POSITION SENSORS
PRESS ENT
SYS
2.
Pressing ENT activates the Position
Sensor sub-state functions. Turn the
Large knob to display the Loran Stations
page.
LORAN1 STATIONS:
5990 M XYZ AUTO
9940 MWXY AUTO
SYS
216
Loran Sensor Sub-State Operations
ENT
SYS
ENT
To Next Page
Loading...
