3.
Pressing SEL activates editing. Turn the
Large knob to make AUTO flash by the
desired GRI.
LORAN1 STATIONS:
5990 M XYZ AUTO
9940 MW Y AUTO
SYS
4.
Turn the Small knob to choose
MANUAL. The Stations for the other
GRI are no longer displayed.
LORAN1 STATIONS:
5990
9940 MWX MANUAL
SYS
5.
Turn the Large knob to make the first
station designator flash. Turn the Small
knob to display the desired station.
LORAN1 STATIONS:
5990
9940 M
MANUAL
SYS
6. Turn the Large knob to make the next
station designator flash. Turn the Small
knob to display the desired station.
Repeat to choose the remaining station.
LORAN1 STATIONS:
5990
9940 MXY
MANUAL
SYS
217
Operations [<*Heading_2]
SEL
To Next Page
Loading...
