Reactivate?
"ACTIVE" 364NM
DEST WPT: EUG
REACTIVATE?
FPL
Pressing ENT when “Reactivate?” is displayed restarts the Active
flight plan, starting sequencing from leg #1.
Rename Plan?
"ACTIVE" 364NM
DEST WPT: EUG
RENAME PLAN?
FPL
Pressing ENT when “Rename Plan?” is displayed allows you to
rename an Inactive flight plan. After pressing ENT, rotate the Large
and Small knobs to rename the flight plan, then press ENT to save the
new flight plan name.
Copy Plan?
"ACTIVE" 364NM
DEST WPT: EUG
COPY PLAN?
FPL
Pressing ENT when the “Copy Plan?” option is flashing allows you to
copy a flight plan’s waypoints from an existing plan into the current
flight plan. You can also copy a flight plan’s waypoints between
another NMC (when installed) and the current plan. After pressing
ENT, rotate the Small knob to select the name of the flight plan
containing the waypoints you wish to copy. Then, press ENT to copy
that flight plan’s waypoints into the current flight plan. The Copy Plan
function is a way to save an active flight plan that has been modified
under a new name.
Delete Plan?
"ACTIVE" 364NM
DEST WPT: EUG
DELETE PLAN?
FPL
Pressing ENT when “Delete Plan?” is displayed deletes all of the
displayed Inactive flight plan, including the flight plan’s summary
page. (Also see Creating Inactive Flight Plans).
156
Flight Plan (FPL) Mode Operations
To Next Page
Loading...
