Press FPL twice to reach the active
plan in FLIGHT PLAN Mode. This
example uses a flight plan from the
Salem (SLE) airport to the Battle
Ground (BTG) VOR and then to the
Olympia (OLM) VOR. Turn the Small
knob clockwise one click to view the
first leg of your flight plan.
Note that on the second line of each leg
page, a number appears to indicate the
leg number. An Asterisk is used after
the number of each leg to indicate the
active flight plan.
SLE TO BTG
1** 001° 53.2NM
ARPT VOR
Two asterisks after the leg number
indicate the active leg of the active
flight plan (SLE to BTG).
BTG TO OLM
2* 331° 74.4NM
VOR VOR
Turn the Small knob until the leg you
wish to activate is shown and then press
ENT twice.
Now fly the ATC assigned heading of 360 until the CDI centers to
indicate that we have intercepted V287.
238
Approach Procedures Operations
ENT
FPL
ENT
FPL
To Next Page
Loading...
