Since our current position, near the LANKS intersection (Point A), is
already beyond our next “TO” waypoint (OED11), on the inbound
course from D333O to OED11, our flight plan would sequence past
our selected leg as soon as the leg is selected. To prevent sequencing,
press OBS/HLD before manually selecting the leg. The OBS/HLD
annunciator will turn on. Manually select the desired flight plan leg
and navigate to the waypoint (Point B). When the leg is intercepted,
press OBS/HLD again to enable sequencing (Point C). The OBS/HLD
annunciator will then turn off.
240
Approach Procedures Operations
To Next Page
Loading...
