When you are ready to depart the hold, you enable sequencing with the
OBS/HLD button. If you are on the “TO” side of the waypoint, the
flight plan will sequence the next time you cross the waypoint. If you
are on the “FROM” side of the waypoint, the flight plan will sequence
immediately. The following example shows holding at the Newburg
VOR(VBG)with020°inboundselectedasthe“OBS”course to UBG.
A special case exists when holding at the FAF. The waypoint will not
be treated as the FAF until sequencing is resumed inbound to the
247
Operations Approach Procedures
To Next Page
Loading...
