II Morrow Inc. NMC 2001 - Page 277

261
Operations Approach Operations
MSG
Annunciator
Flashes.
Enable
Approach?
Press ENT
and then
Enter Local
Altimeter
Setting
At or After MAP,
Press OBS/Hold
for Missed Approach
Transition Operation
Approach
Approach
Active Operation
Load
Approach
to Active
Flight Plan
Enroute Operation
Approach Transition Operation
CDI Scale = 5nm
CDI Scale = 1.0nm
CDI Scale
2nm to
FAF
3nm to
FAF
CDI Scale
Transitions
1.0 to 0.3nm
CDI Scale
Transitions
5.0 to 1.0nm
ACTIVE
Annunciator
Flashes
ACTIVE
Annunciator
on Steady
30nm to
Airport
APPRCH Annunciator On
IAF
FAF
MAP
MAHP
Proceed t
o
Selected
Waypoint
= 0.3nm
CDI Scale = 1.0nm
Intermediate waypoints not illustrated
OBS/Hold
Annunciator
on Steady
CDI Scale
Transitions
0.3nmto1.0nm
If Missed Approach
Selected
NOTE:
If ACTIVE Annunciator
is not Steady at FAF, Do
NOT Continue Approach