En Route to BOI
1. Create a flight plan named “Example3” with the last two waypoints
as the Ontario, Oregon airport (ONO) and the Boise, Idaho airport
(BOI).
2. Activate the flight plan. Press FPL. Turn the Large knob to display
the “Example3” flight plan. Press SEL and the ENT.
*ACTIVE* 43.7NM
DEST WPT:
ACTIVE
3.LoadtheNDB approach toBOI.Inflightplan mode, pressSEL.The
display will flash “Load Approach?” Press ENT. Select “NDB
10R:PARMO” with the Small knob and press ENT.
*ACTIVE* 48.9NM
NDB 10R:PARMO
APPROACH: BOI
30 nm from Boise (BOI)
1. At 30 nm from your destination the MSG annunciator will light.
Press MSG. At the “Enable Approach” prompt, press ENT.
ENABLE APPROACH?
288
To Next Page
Loading...
