3. As soon as FF005, the FAF becomes the active waypoint. The
Approach Active light will begin flashing and the CDI will begin
scaling to approach sensitivity, as you will be within 2 nm of the
FAF when it becomes active.
4. As you cross FF005, verify that the Approach Active annunciator is
lighted indicating that you may continue the approach.
Point E (Between FF005 and MA005)
1. Continue to the Missed Approach Point (MA005).
2. Verify that the OBS/HLD and Approach Active annunciators are
lighted.
Point F (Turning to intercept 165° to MUGGZ)
1. When you reach the Missed Approach Point and you wish to fly the
published Missed Approach procedure, press OBS/HLD as you
start your climbing right turn.
2. The CDI will scale back to Approach Transition CDI sensitivity.
The MAP (MUGGZ) will become the active waypoint.
3. Select a 165° inbound course to MUGGZ. Press DIRECT-TO
twice.Turn the Largeand Smallknobs to select165° andthenpress
ENT.
298
To Next Page
Loading...
