Power-Up Sequence (continued)
No Database
Enter Manual
Mag Var: 00°W
NAV
If the Special Use Airspace (SUA) alerts have been turned off (see
System Mode for more information on SUA setups), the next screen is
displayed for up to 4 seconds.
Airspace Alert
Are Off
SEL To Reset
NAV
To turn the airspace alerts back on, press SEL when the screen shown
on the previous page is displayed, then press ENT when the screen
shown below appears, or press SEL to cancel.
Press ENT To
Turn Airspace
Alerts On
NAV
If the Special Use Airspace (SUA) setups (restricting which SUA
alerts are displayed) have been changed from the standard setups, the
screen shown below will be displayed for up to 4 seconds.
Airspace Setups
Are Non Standard
Setups
NAV
To reset the airspace setups, press SEL within 4 seconds, then press
ENT, as shown on the screen below, or press SEL again to cancel.
19
Operations Power-Up Sequence
To Next Page
Loading...
