Power-Up Sequence (continued)
At the end of the power up sequence, you need to decide if you want to
clear the last flight plan from memory. Turn the Small, inner knob to
display “YES” or “NO.” Then, press ENT.
CLEAR ACTIVE
FLIGHT PLAN
YES?
NAV
At this point, the power-up sequence is complete.
North America
EXPIRES 11/09/95
PRESS ENT
NAV
If your unit is installed for IFR GPS approach navigation, a sequence
of IFR output tests will be run to verify CDI andVDI annunciators as
well as a display test.
STARTING IFR
OUTPUT TESTS
NAV
24
Power-Up Sequence Operations
To Next Page
Loading...
