86
UHK-430/CCU-430 1710 VER2 (E)
5.3 Menu Configuration and content
5.3 Menu Configuration and content
Various setting items performed on the camera side are displayed.
■
Sub Menu Setting Items
(1) USER MENU
Sets the items used in daily operation. (Items regarding maintenance and inspection are not included.)
0$5.(5&+$5
9)9,'(26(77,1*
7$//<,1',&$725
)2&86$66,67
,17(5&20$8',2
- FUNCTION SW
6<67(0
- LENS
,1)250$7,21
- USER MENU CUSTOM
Please refer to
"5.2 Basic Operation of the Menu" "About USER MENU" (P. 83)
for more information of the USER
MENU.
(2) MARKER CHAR
6HWVWKHIXQFWLRQXVHGWRVXSSRUWDFDPHUDPDQZLWKGLVSOD\VRIYDULRXVPDUNHUVRQWKHYLHZ¿QGHUGXULQJVKRRWLQJ
(3) FOCUS ASSIST
$IXQFWLRQXVHGWRVHWWKHKLJKOLJKWRIWKHYLHZ¿QGHUYLGHRVLJQDOVHWFDQGVXSSRUWDFDPHUDPDQGXULQJVKRRWLQJ
(4) INTERCOM/AUDIO
Performs various settings according to the operation of intercom and audio.
(5) VIDEO I/O
Sets the input/output video signals of the camera.
(6) LENS
6HWVWKHLQIRUPDWLRQUHTXLUHGWRVHWOHQVLULVHVDQGFUHDWHOHQV¿OHV
(7) FUNCTION SW
6HWVWKHIXQFWLRQVZLWFKHVRIWKHFDPHUDDQGYLHZ¿QGHU
(8) VIDEO ADJUSTMENT
Performs various condition settings required for video signal processing and auto setup.
(9) TALLY/INDICATOR
6HWV7$//<GLVSOD\DQGWKHFRQGLWLRQVHWWLQJVIRU=(%5$GLVSOD\
(10) FAN CONTROL
6HWVWKHRSHUDWLQJFRQGLWLRQVRIDLUFRROLQJIDQVEXLOWLQWKHFDPHUDDQGYLHZ¿QGHU
(11) FILE OPERATION
Saves and sets various data using USB memory.
(12) SYSTEM
Sets the basic operation of the camera.
(13) INFORMATION
Provides the operation state of the camera.
(14) MENU MODE
Displays the setting mode of the menu.
(15) F MENU (exclusive use)
,QWURGXFHVWKHVHWWLQJPHQXRIWKHYLHZ¿QGHU3OHDVHUHIHUWRWKHRSHUDWLRQPDQXDORI\RXUYLHZ¿QGHUIRUPRUHGHWDLOV
Caution:
Some of operations may be different from this manual due to improvements. Please note that some of operations may be different from
this manual due to improvements.