Ikegami CCU-430 - Page 90

72
UHK-430/CCU-430 1710 VER2 (E)
4.6 Auto Setup
■
FULL QUICK Auto Setup
The FULL QUICK auto setup can be activated from the camera menu, CCU front side, OCP, or MCP. To perform the FULL
QUICK auto setup from an OCP or MCP, perform the following steps.
1 Press the SETUP button in the function switch part.
2 Press the AUTO SETUP button on the LCD.
3 Press the Full Quick button on the LCD.
4 Press the Start button on the LCD.
■
QUICK Auto Setup
6HOHFW³48,&.´IURPWKHFDPHUDPHQX³$8726(78302'(´³$8726(783´7RSHUIRUPWKH48,&.DXWRVHWXSIURPDQ
OCP or MCP, perform the following steps.
1 Press the SETUP button in the function switch part.
2 Press the AUTO SETUP button on the LCD.
3 Press the Quick button on the LCD.
4 Press the Start button on the LCD.