Inovance H3U Series - Page 673

672
10
10 Extension Modules 10.2.4 Analog Input Module (AM600-4AD)
(
4
) Example for H
3
U+AM
600-4
AD programming
① Select the module AM600-4AD to be added from the module list. Double-click the module to
automatically add it to the extension rack, or use the left mouse button to drag it onto the extension
rack.
② Double-click the AM600-4AD module on the rack, and the conguration interface appears (as below).
On the conguration interface, enable the corresponding channel. Disable unused channels to reduce the
scan duration.
Select voltage or current of different ranges from the
Translate
drop-down list. In this example,
Translate
is
congured as
-10V~10V
voltage input.
Select lter time from the
Filtering
drop-down list.
③ On
the
IO Map
tab page, map CH0 of 4AD module to D200 of element D.