Intel SC5650BCDP User Manual

Intel
®
RAID Software User’s Guide 97
a. Type the following command.
vi /etc/inetd.conf
b. Search for ssh in the file.
By default, the line that contains ssh has comments.
c. Remove the comment by deleting the symbol # in front of the line.
d. Save the file and exit.
3. Restart the inetd daemon for the changes to take effect.
a. Type the following command to get the pid for inetd:
ps | grep inetd
b. Type the following command to kill the inetd process:
Kill -9 <inetd pid>
c. Type the following command to restart the inetd daemon:
#inetd
4. Type the following command to use scp to copy storelib from a remote machine to the
following path:
/lib dir scp <user@ip:path to
storelib>/libstorelib.so.2.53 /lib/libstorelib.so
5. Restart SFCB and check its status.
a. Type the following command to restart SFCB:
/etc/init.d/sfcbd restart
b. Type the following command to check the status of SFCB:
/etc/init.d/sfcbd status
Note: The updated Storelib library in the /lib directory does not persist across reboots.
Each time you restart the VMWare host, you have to follow this procedure to
replace the Storelib library.

Intel SC5650BCDP Specifications

General

Brand	Intel
Model	SC5650BCDP
Category	Server
Language	English