Intel SC5650BCDP User Manual

182 Intel
®
RAID Software User’s Guide
195 Warning BBU disabled; changing WB virtual disks to WT
196 Warning Bad block table on PD %s is 80% full
197 Fatal Bad block table on PD %s is full; unable to log block %lx
198 Info Consistency Check Aborted Due to Ownership Loss on %s
199 Info Background Initialization (BGI) Aborted Due to Ownership Loss on %s
200 Critical Battery/charger problems detected; SOH Bad
201 Warning Single-bit ECC error: ECAR=%x, ELOG=%x, (%s); warning threshold
exceeded
202 Critical Single-bit ECC error: ECAR=%x, ELOG=%x, (%s); critical threshold
exceeded
203 Critical Single-bit ECC error: ECAR=%x, ELOG=%x, (%s); further reporting
disabled
204 Critical Enclosure %s Power supply %d switched off
205 Info Enclosure %s Power supply %d switched on
206 Critical Enclosure %s Power supply %d cable removed
207 Info Enclosure %s Power supply %d cable inserted
208 Info Enclosure %s Fan %d returned to normal
209 Info BBU Retention test was initiated on previous boot
210 Info BBU Retention test passed
211 Critical BBU Retention test failed!
212 Info NVRAM Retention test was initiated on previous boot
213 Info NVRAM Retention test passed
214 Critical NVRAM Retention test failed!
215 Info %s test completed %d passes successfully
216 Critical %s test FAILED on %d pass. Fail data: errorOffset=%x goodData=%x
badData=%x
217 Info Self check diagnostics completed
218 Info Foreign Configuration Detected
219 Info Foreign Configuration Imported
220 Info Foreign Configuration Cleared
221 Warning NVRAM is corrupt; reinitializing
222 Warning NVRAM mismatch occurred
223 Warning SAS wide port %d lost link on PHY %d
224 Info SAS wide port %d restored link on PHY %d
225 Warning SAS port %d, PHY %d has exceeded the allowed error rate
Number Type Description

Intel SC5650BCDP Specifications

General

Brand	Intel
Model	SC5650BCDP
Category	Server
Language	English