Need help?Do you have a question about the Intermec EasyCoder PC4 and is the answer not in the manual?
General| Resolution | 203 dpi |
|---|---|
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Print Method | Direct Thermal |
| Max Print Width | 4.09 inches (104 mm) |
| Max Print Speed | 4 inches per second |
| Max Print Length | 39 inches |
| Media Type | Roll-fed, die-cut, continuous, fanfold, tags, tickets |
| Media Width | 1.0 - 4.65 inches |
| Media Thickness | 0.06 mm (0.00236 in) to 0.18 mm (0.00708 in) |
| Interface | RS-232 |
| Memory | 4 MB Flash, 8 MB SDRAM |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 10 to 90% non-condensing |
To Previous Page
