Executing the inspection
Inspection Menu
107
Inspection Menu
This is where you delete, edit or create new events. You can select and edit sections and events as well; for general projects you can close sections.
The submenu of the inspection menu includes the following function buttons:
- Close Section (only with a running recording)
- Sections
- Event Overview (only with a running recording)
- Protocol Preview
- Inclination measurement
Close Section
This menu item is active only if the video recording is running. If you select Close Section the currently opened section will be closed and you
can only start a new recording sequence when you select an existing section or create a new section.
Sections
Here you can select, manage, or edit the existing sections or create a new section. Read the information starting on Seite 63 for a precise
description of the secions Overview.
Event Overview
This is where you delete, edit or create new events. Read the information starting on Seite 70 for a precise description of the event overview.
To Next Page
Loading...