iPEK VISIONCONTROL VC200 - Extras; Set Meter Counter; Set Overall Meter Counter

Executing the inspection
Extras
99
Extras
Extended supplemental functions can be set in the Tools menu. Examples are setting the meter counter or entering notes. The functions depend
on the relevant connected system and are only active if the system supports these functions.
The submenu of the Tools menu includes the following function buttons:
- Set Meter Counter
- Set total Meter Counter
- Activate AutoStop
- Activate AntiRoll
- Notes
Set Meter Counter
After activating the Set Meter Counter button the screen number pad will open. Enter the desired value and confirm the dialog with OK.
Set Overall Meter Counter
After activating the SET OVERALL METER COUNTER button the screen number pad will open. Enter the desired value and confirm the
dialog with OK.
NOTE!
For information on using the screen number pad please read the details on Seite 31.