iPEK VISIONCONTROL VC200 - Supported Catalogs; Catalogs in VISIONREPORT

Functional description
Catalogs
18
Catalogs
Catalogs contain standardized texts for describing e.g. pipe damages as well as standardized codes for each observation. VISIONREPORT
includes a multitude of catalogs for various established sewer inspection standards. Several catalogs are provided by CDLab AG, Switzerland. These
catalogs are explicitly marked. Projects created with these catalogs can be imported seamlessly into WinCan V8.
Select catalogs (e.g. MSCC WRC-3 and WRC-4) also support WinCan 3D. When using these catalogs, you can create 3D plans after the import
into WinCan. In case you need damage scoring, you can do this yourself depending on the catalog. The scoring data will be highlighted in color
in a section protocol.
Catalogs in VISIONREPORT
Catalog Locale Defect grades Inclination
Measurement
WINCAN
Export
WINCAN 3D
Support
ATV-M 143 Teil 2 (iPEK) Germany •
DWA-M 149-2 (iPEK) Germany •
Isybau 96 Germany • • •
Isybau 2001 Germany • • •
DWA-M149-2 (CDLab) Germany • • • •
ATV-M 143 Teil 2 (CDLab) Germany • • •
Isybau 2006 Germany • •
Isybau 2006 Austria • •
EN 13508-2 Switzerland (German) • •
DanDas Denmark •
WRC MSCC-3 Great Britain • • •
WRC MSCC-4 Great Britain • • •
NASSCO PACP-4 USA • • •
EN 13508-2 Italy • • •
Sewrat Australia • •
WSA 05-2006 Australia • •
WSA 05-2006 Australia • •
An up-to-date list of the available damage catalogues is available from your iPEK service partner or on the iPEK website.